GripWorks offers the industry’s most complete line of these hard-to-find grips. They are designed to fit rectangular bars that are commonly used on tools, ball valves, and levers. The unique dip molding production process allows hundreds of variations with respect to wall thickness, hardness, inside length, surface texture, and color.

More Sizes
The following chart highlights our extensive line of flat grips. Each set of tooling can manufacture grips in any length up to the maximum inside length stated in the chart. Since the vinyl material will stretch to fit larger sizes, many of these grips will actually work on larger bars. Of course, custom tooling is always an option for large volume applications.

Double Dipping Some flat hand grips can utilize the double dipping process for creating more functional or attractive grips. Please consult a sales representative for design assistance. Materials Flat grips tend to work best in harder durometer materials found in our Flexfit section. Softer durometer grips will have a tendency to slip around on a flat bar and not function as well, although, high durometer versions exist for most of our popular materials. Finishing Operations Flat grips can be printed, punched or sliced into sleeves. Go to our finishing section for more information.

Many of these items are available in package quantities as low as 50 or less!

Rectangular Flat Grips
Inside Dimension "A"		Inside Dimension "B"		Max Inside Length "C"		Nominal Wall Thickness "D"
						(At Min Length)		(At Max Length)
in	mm	in	mm	in ±.062	mm ±1.57	in ±.010	mm ±0.25	in ±.010	mm ±0.25
0.062	1.57	.312 RE	7.93 RE	4.000	101.60	0.065	1.65	0.070	1.78
0.062	1.57	.343 RE	8.71 RE	3.875	98.43	0.065	1.65	0.070	1.78
0.062	1.57	.375 RE	9.53 RE	4.250	107.95	0.065	1.65	0.070	1.78
0.062	1.57	.437 RE	11.10 RE	4.375	111.13	0.065	1.65	0.070	1.78
0.062	1.57	.500 FE	12.70 FE	4.250	107.95	0.065	1.65	0.070	1.78
0.062	1.57	.625 RE	15.88 RE	4.500	114.30	0.065	1.65	0.070	1.78
0.062	1.57	.750 RE	19.05 RE	4.750	120.65	0.065	1.65	0.070	1.78
0.090	2.29	1.000 FE	25.40 FE	5.125	130.18	0.065	1.65	0.070	1.78
0.095	2.41	.875 RE	22.23 RE	4.750	120.65	0.065	1.65	0.070	1.78
0.125	3.18	.437 RE	11.10 RE	4.500	114.30	0.065	1.65	0.070	1.78
0.125	3.18	.500 RE	12.70 RE	4.500	114.30	0.065	1.65	0.070	1.78
0.125	3.18	.500 FE	12.70 FE	4.250	107.95	0.065	1.65	0.070	1.78
0.125	3.18	.562 FE	14.28 FE	4.500	114.30	0.065	1.65	0.070	1.78
0.125	3.18	.675 RE	17.15 RE	3.750	95.25	0.065	1.65	0.070	1.78
0.125	3.18	.750 RE	19.05 RE	5.250	133.35	0.065	1.65	0.070	1.78
0.125	3.18	.750 FE	19.05 FE	4.250	107.95	0.065	1.65	0.070	1.78
0.125	3.18	1.000 RE	25.40 RE	5.000	127.00	0.065	1.65	0.070	1.78
0.125	3.18	2.250 FE	57.15 FE	4.375	111.13	0.065	1.65	0.070	1.78
0.162	4.11	1.250 RE	31.75 RE	6.000	152.40	0.065	1.65	0.070	1.78
0.187	4.75	.500 RE	12.70 RE	4.250	107.95	0.065	1.65	0.070	1.78
0.187	4.75	.937 FE	23.80 FE	5.500	139.70	0.065	1.65	0.070	1.78
0.187	4.75	1.500 RE	38.10 RE	8.000	203.20	0.065	1.65	0.070	1.78
0.250	6.35	.750 RE	19.05 RE	5.250	133.35	0.065	1.65	0.070	1.78
0.250	6.35	1.000 RE	25.40 RE	5.250	133.35	0.065	1.65	0.070	1.78
0.250	6.35	1.250 RE	31.75 RE	5.500	139.70	0.065	1.65	0.070	1.78
0.250	6.35	2.000FE	50.80FE	6.000	152.40	0.065	1.65	0.070	1.78
0.315	8.00	1.772 RE	45.01 RE	5.000	127.00	0.065	1.65	0.070	1.78
0.368	9.35	.970FE	24.64FE	6.000	152.40	0.065	1.65	0.070	1.78
0.750	19.05	.750 RE	19.05 RE	5.250	133.35	0.065	1.65	0.070	1.78
Chart for typical single dip wall specs - Formulas (Flexfit, Softex, etc.)

NOTES:
1) RE = Round End
2) FE = Flat End
3) Inside length tolerance: ±.062" (1.57 mm)
4) Wall thickness tolerance: ±.010" (.25 mm)
5) Inside lengths at ±.062" (1.57 mm) increments.
6) Wall thicknesses are heavier as length increases.
7) Standard colors: Black, Red, White, Blue, Green, Orange, Yellow, Gray.
Other colors available upon request.